Black Friday Combo Deal: Must Inverter + Beesman Battery — Power Your Home for Less!
Unlock energy independence with this expertly curated solar package from Sona Solar Zimbabwe. Featuring the powerful 3.2KW Must PV1800 VPM Inverter, a high-performance 2.7kWh Beesman LiFePO4 Battery, and efficient Longi Solar Panels, this all-inclusive deal provides everything you need for a reliable and professional installation.
![]() |
| Must 3.2kW Inverter + Beesman 2.7kWh Battery |
A Fully-Costed Power Solution
For a total of $1,000.00, this package includes all core components, mounting hardware, safety devices, and the complete labour for installation and commissioning. It represents a transparent, value-driven investment into a sustainable energy future for your home.
This is a complete walk-in, walk-out price for a professional solar installation.
Unlock massive savings this Black Friday with the Must & Beesman Combo Deal from Sona Solar Zimbabwe. Get a complete, ready-to-install home power package for only $1,000.00.
- Inverter: Must PV18-3224 VPM II — 3.2kW, 24V DC, 120A max combined charging current.
- Battery: Beesman LiFePO₄ — 2.7kWh, 25.6V nominal voltage with intelligent BMS.
- Solar Panels: Longi high-efficiency modules for consistent power generation.
- Installation: Professional setup, configuration, and commissioning by Sona Solar experts.
Limited-time offer — valid through Black Friday week only!
The Must 3.2kW inverter and Beesman 2.7kWh battery can be connected physically, but manual configuration is required for optimal performance and safe operation. These devices do not support automatic communication via CAN or RS485.
Key Must Inverter Specifications:
- Model: Must PV18-3224 VPM II
- System Voltage: 24V DC
- Rated Power: 3.2kW / 3200W
- Maximum Charge Current: 120A (AC + Solar combined)
Beesman Battery Specifications:
- Nominal Voltage: 25.6V (LiFePO₄)
- Capacity: 2.7kWh
- Recommended Charge Voltage: 28.4V (Bulk/Absorb)
- Float Voltage: 27V
- Discharge Cutoff: 21–22V
Follow these steps to configure your Must inverter for use with the Beesman battery:
- On the inverter’s LCD, navigate to Setting Mode → Battery Type → select “USER” or “Li”.
- Set Bulk/Absorb Voltage to 28.4V.
- Set Float Voltage to 27V.
- Adjust Low DC Cutoff to 21–22V to protect against deep discharge.
- Limit Max Charge Current to the Beesman’s recommended level (typically 50–60A).
- Save and reboot the inverter to apply new settings.
Tip: Use correctly sized cables (minimum 25mm² for short runs) to prevent voltage drop and overheating.
While the Beesman 2.7kWh battery works with the Must inverter, its capacity may be modest for extended usage. You can:
- Expand capacity by connecting additional Beesman batteries in parallel (same voltage and state of charge).
- Manage loads by keeping continuous usage below 80% of the inverter’s capacity (≈2560W).
- Monitor performance via the inverter’s LCD display for daily and total energy production.
This configuration ensures both safety and durability — ideal for homes and small businesses seeking energy independence.
Note: These units do not auto-sync or exchange data. Manual configuration is required for optimal results. The Beesman’s integrated BMS safeguards your system by preventing overcharge, short-circuit, and over-discharge conditions.
⚡ Black Friday Offer: Available only during the promotion week — includes free professional installation within Harare and discounted hardware rates nationwide.
Reserve your system early through Sona Solar Zimbabwe to secure your slot before the festive installation rush.
Core Components & Specifications
3.2KW Must Hybrid Inverter (PV1800 VPM)
The heart of your system, with a 60A MPPT controller and pure sine wave output for clean, efficient power.
2.7kWh Beesman LiFePO4 Battery
A modern, long-lasting 25.6V, 106Ah energy storage solution, ensuring you have reliable power day and night.
3 x Longi 440W Solar Panels
High-efficiency panels to maximize energy generation, providing a total of 1.32kW of solar power.
Must 3.2KW Inverter Specs
| Rated Output Power | 3200W |
|---|---|
| DC System Voltage | 24V |
| MPPT Charge Controller | 60A |
| MPPT Voltage Range | 60 - 160VDC |
| Max PV Input Voltage | 160VDC |
| Output Waveform | Pure Sine Wave |
Beesman 2.7kWh Battery Specs
| Model | EA40A-2.7K-B |
|---|---|
| Rated Energy | 2.71kWh |
| Nominal Voltage | 25.6V |
| Rated Capacity | 106Ah |
| Rated Charge/Discharge Current | 20A |
| Max Charge/Discharge Voltage | 29.2V / 20.8V |
| Allowable Connection in Parallel | 4 Units |
System Capabilities & Guidance
This system is ideal for powering essential household and business items. Runtimes are estimates and vary based on usage.
| Appliance | Estimated Runtime |
|---|---|
| LED Lights (15-20) | 24+ hours |
| Smart TV (50") | 12-14 hours |
| Fridge (Single Door) | 10-12 hours |
| Laptops & WiFi | 12-15 hours |
| Small Borehole Pump (e.g., 1HP) | 1.5-2 hours |
- Homes: Powering lights, TVs, fridges, fans, and routers.
- Shops & Small Businesses: Ideal for POS systems, lighting, and CCTV.
- Off-grid Cabins & Rural Homes: Reliable power where the grid is unstable.
- Farms & Agriculture: Powering electric fencing and small pumps.
Peace of Mind & Warranty
Sona Solar Zimbabwe stands behind its products and workmanship, offering comprehensive warranties for your peace of mind.
| Warranty Type | Duration |
|---|---|
| Installation Warranty | 1 Year |
| Manufacturer's Warranty (Inverter & Battery) | 5 Years |
| Solar Panel Warranty | 25 Years |
Please Note: All electrical products must be installed by a professional and suitably qualified person in accordance with ZERA regulations to ensure your warranty remains valid. The warranty does not cover damage from improper use, physical abuse, non-accredited installation, or force majeure events like lightning strikes.
Frequently Asked Questions
Must 3.2kW Inverter & Beesman 2.7kWh Battery
No, automatic communication between these two brands is unlikely. The Must inverter’s closed-loop BMS compatibility typically supports select manufacturers only. You must use manual configuration for this setup.
Access the inverter’s LCD menu and manually enter the correct battery parameters from the Beesman datasheet:
- Battery Type: Set to "USER" or "Li" (not AGM or FLd).
- Bulk/Absorb Voltage: Charging voltage for the main charge cycle.
- Float Voltage: Voltage for maintaining a full charge.
- Max Charge Current: Limit this to the Beesman battery’s safe maximum, not the inverter’s default (which can be 120A).
- Low DC Cut-off Voltage: Set the minimum discharge voltage to protect the battery.
The Beesman 2.7kWh battery can power the inverter but will discharge quickly under heavy load. Running the inverter at full capacity (3.2kW) would deplete the battery in under an hour. It’s best suited for moderate loads or to be paired with additional batteries.
Keep your continuous power draw below 80% of the inverter’s rated output — about 2,560W. This helps avoid overheating, ensures stable performance, and extends inverter lifespan.
Yes, you can connect multiple Beesman batteries in parallel to increase total capacity, as long as all units share the same voltage (24V). Make sure they have similar charge levels before connecting.
- Configuration: Ensure “User” battery mode is selected and voltage parameters match the Beesman specs.
- Cabling: Confirm correct polarity and secure connections.
- Over-voltage lockout: The inverter might block charging if it detects high voltage — perform a reset if needed.
- Breakers: Check both inverter and external DC breakers for tripping.
This usually indicates voltage drop or a premature BMS cutoff:
- Cable Gauge: Thin cables can cause voltage drop under load — use correctly sized wires.
- BMS Cutoff: The battery’s BMS may be shutting down to protect the cells, which cuts power abruptly and triggers a low-voltage alarm.
Since Must and Beesman are unlikely to communicate directly via CAN or RS485, ignore communication errors. To fix issues:
- Ensure inverter communication mode isn’t set to “BMS”.
- Disconnect any communication cable causing false errors.
- Recheck all manual configuration settings.
- If errors persist, contact your supplier for firmware updates or diagnostic support.
Follow Our Social Media Platforms:
Common Questions and Popular Searches
Explore Answers To Frequent Questions And Discover Resources For Your Solar Journey:
1kVA Inverter Load Guide
Load guide for small households.
2kVA System Load Capacity
Powering essentials in medium homes.
3kVA System Panel Count
Understand solar array sizing.
3kVA Inverter Load Guide
Appliance guide for a typical household.
Best 3kVA Inverter Brand
Compare reliability and warranties.
3kVA Appliance Load Guide
Understand simultaneous load capacity.
3kVA Powering Motor Loads
Guidance on handling motor loads.
Choosing the Right Inverter
Matching inverters to your specific load.
Match Panels to Inverter
Tips for optimal system performance.
3.5kVA Inverter Load Guide
Explore residential setup capabilities.
Best Solar Panels Zimbabwe
Analysis of performance and durability.
Solar Companies Zimbabwe
Customer service and reliability.
Best Solar Panel Brands
Guide for home and business solutions.
Solar Installers Zimbabwe
Professional and certified installers.
3kVA System Cost Guide
Get pricing information for Zimbabwe.
5kVA System Cost Guide
Budget requirements for systems.
Contact Our Sales Team:
Sona Solar Zimbabwe
Address:
7 Frank Johnson Avenue, Eastlea, Harare, Zimbabwe.
Call/WhatsApp:
Sales:
+263 78 293 3586
Sales:
+263 78 922 2847
Operations:
+263 78 864 2437
Email:
sonasolarzw@gmail.com
Website:
www.sonasolar.co.zw
Borehole Experts Zimbabwe
Address:
7 Frank Johnson Avenue, Eastlea, Harare, Zimbabwe.
Call/WhatsApp:
Sales:
+263 77 389 8979
Sales:
+263 71 500 3777
Operations:
+263 71 918 7878
Email:
boreholeexpertszw@gmail.com
Website:
www.boreholeexperts.co.zw
